-
फाइबर वितरण बॉक्स
-
FTTH वितरण बॉक्स
-
केबल वितरण बॉक्स
-
एलएसए प्लस मॉड्यूल
-
एमडीएफ मुख्य वितरण फ़्रेम
-
सब्सक्राइबर टर्मिनल ब्लॉक
-
रैक माउंट पैच पैनल
-
आरजे 45 कीस्टोन जैक
-
क्षैतिज केबल प्रबंधक
-
नेटवर्क केबल फेसप्लेट
-
110 टर्मिनल ब्लॉक
-
ओडीएफ ऑप्टिकल वितरण फ़्रेम
-
ऑप्टिकल फाइबर पैच कॉर्ड
-
फाइबर ऑप्टिक ब्याह बंद
-
आईडीसी टर्मिनल ब्लॉक
-
नेटवर्क पंच डाउन उपकरण
-
फाइबर ऑप्टिक सहायक उपकरण
-
एंड्रियास सैंडविकबहुत अनुभवी निर्माता !!
-
क्रिस्टबेर गोमेज़एक विश्वसनीय, विश्वसनीय और अनुभवी निर्माता आप पर भरोसा कर सकते हैं
-
इल्कर एरीमेज़उन्होंने दूरसंचार के पूर्ण समाधान दिए।
-
احمد عبداللهईरान के दूरसंचार के लिए इस्तेमाल किए गए आपके एएमपी टायको पिकोबैंड कनेक्टर उत्कृष्ट हैं, हमारे ग्राहक गुणवत्ता से बहुत संतुष्ट हैं।
RJ45 8P8C Cat5e UTP Gold Plated Modular Plug
नि: शुल्क नमूने और कूपन के लिए मुझसे संपर्क करें।
व्हाट्सएप:0086 18588475571
WeChat: 0086 18588475571
स्काइप: sales10@aixton.com
यदि आपको कोई चिंता है, तो हम 24 घंटे ऑनलाइन सहायता प्रदान करते हैं।
xउत्पाद | बिल्ली 5e मॉड्यूलर प्लग 8P8C | प्रकार | आरजे 45, UTP |
---|---|---|---|
श्रेणी | CAT5e | सामग्री | पीसी |
Glod मढ़वाया | ग्राहकों पर निर्भर | आवेदन | दूरसंचार |
RJ45 8P8C Cat5e UTP Gold Plated Modular Plug
PRODUCT FACT
The 8P8C (8 position 8 contact, also backronymed as 8 position 8 conductor; often called RJ45 ) plug is the male type of modular connector commonly used for Ethernet over twisted-pair applications, where the plug on each end terminated using the T568A or T568B pin/pair assignments that are defined in ANSI/TIA-568-C.2 standard.
These connectors are commonly used in computer networking and other telephone applications involving unshielded twisted-pair (UTP), shielded twisted-pair (STP), and multiconductor flat cable. Most network communications today are carried over Category 5e, Category 6 or Category 6A cable with an 8P8C modular plug crimped on each end.
§ SPECIFICATION
-Lead-free & RoHS compliant, certified by TUV.
-Meet the ANSI/TIA-568-C.2, ISO/IEC 2ndedition and CENELEC EN 50173-1 cabling requirements of IEC 60603-7 for RJ45 8-way connector.
ELECTRICAL
-Voltage proof: 1000V DC or AC peek, contact-to-contact.
-Current-carrying capacity: 0.75 Amps minimum
-Contact resistance: 20MΩ maximum
-Insulation resistance: 500MΩ minimum at 10V DC or 100 MΩ minimum at 500V DC
-Input to output resistance: 200MΩ maximum
-DC resistance: 0.2 ohm maximum
MECHANICAL
-Mechanical operation: 750 cycles minimum
-Effectiveness of connector coupling devices: 50 N (11 lbf) for 60s ± 5s
ENVIRONMENTAL
-Temperature: -10℃~60℃
-Humidity: 10%~90%RH